Transport And Installation; Electric Shock; Risk Of Injury - Abicor Binzel MF1-Laser-Front Mode D'emploi

6 Commissioning

6.1 Transport and installation

Electric shock

Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed, or worn parts.
• Power to the device should be disconnected when mounting all parts.

Risk of injury

Physical injury due to falling devices and add-on components.
• Select a suitable location when unpacking the device.
• Avoid abrupt lifting and setting down.
• Do not lift the components above persons or other devices.
• Transport the components in an upright position.
• Use suitable assistance to help mount the device.
• Position the robot so it can be easily mounted.
• Make sure it is standing firmly on the ground or other surface.
• Wear your personal protective equipment: safety shoes with steel toe caps, protective gloves, safety
• Send bystanders out of the danger zone.
• Note the weight of the individual components.
NOTICE
• Ensure clear access to the control elements and connections.
• Protect the components against rain and direct sunlight.
• Use the device only in dry, clean and well-ventilated rooms.
EN - 12
DANGER
CAUTION
helmet, ear protectors.
 3.1 Technical data on page EN-6
MF1-Laser Front/Rear