Abicor Binzel MF1-Laser-Front Mode D'emploi page 40

6 Commissioning
1
Fig. 12
6 Remove the drive rolls (1) upwards.
7 Remove the pressure rolls (3) sidewise from the rocker arm.
6.3.1 Replacing the rocker arm
1 Open the housing cover at the lug and lift the cover up.
2 Push the pressure lever (1) up to release the locking mechanism.
1
2
Fig. 13
3 Swivel the rocker arm (3) to the side.
4 Unscrew the Allen screw (2).
5 Remove the rocker arm (3) upward.
6 Place the new rocker arm (3) on the rotation axis (4) and screw it tight with the Allen screw (2).
EN - 16
1
Drive rolls 2
Remove pressure rolls
1
Pressure lever 3
Allen screw
Replacing the rocker arm
2
Quick-release clamps 3
2
Rocker arm 4
MF1-Laser Front/Rear
3
Pressure rolls
3
4
Rotation axis