Dantherm CDT 22 Manuel D'entretien page 25

Get ready for use,
Illustration, The Illustrations show the minimum distance required between the exhaust air side and
placing the wall:
Placement Place the dehumidifier so that ...
• it stands in the middle of a room (if possible). This ensures good air circulation.
• so that the air can be taken in freely at the back of the unit and blown out at the
• the minimum distance from a wall should be
• the dehumidifier is not installed near a source of heat as for example a radiator,
In addition, take care that doors and windows of the room to be dehumidified are kept
closed.
Electrical The unit is complete with plug and cable and ready for connection to a 230 V/50 Hz
connection socket. The socket should be fuse protected with a 10 A fuse or a 16 A circuit breaker.
continued
Fig. 20
CDT 22/35/50/85
front
above) The minimum distance on the exhaust air side should be 3 meters.
Fig. 21
CDT 35S
at least about 60 cm.(See illustration
25