Setting The Language; Setting The Basic Volume (B2); Setting The Time And Date; Basic Settings - M-E Vistadoor Vistus VDV-907 Mode D'emploi

VDV-907 | ENGLISH

Setting the language

Touch the flag symbol to access the language
selection menu. Touch the desired language
there and then save the setting by touching
the save symbol. The heading of this menu is
immediately displayed in the selected lan-
guage if the saving was successful. Use the
back arrow to return to the settings menu.

Setting the basic volume (B2)

Touch the mouth symbol to set the basic vo-
lume. The + button increases the volume, the
- button decreases it. The filled dots show
you how high the volume is set. The volume
is saved automatically. Use the back arrow to
return to the settings menu.
GB

Setting the time and date

Touch the clock/calendar symbol to enter the
settings menu for date and time. Touch the
field you want to set (the active field turns
blue). You can then use the arrows on the
right to change the value. You can set the
time and date automatically, which requires a
WLAN connection with Internet access, or
manually. The UTC (Universal Time, Coordi-
nated) setting should be "0" in manual clock
mode.
NOTE: If the time is set to automatic and the
UTC is set to 0, the correct time zone is
determined automatically. If a different UTC
is set, it will always be used. In this case, it is
necessary to set the daylight saving time ma-
nually. After you have set the date and time,
tap the save symbol at the bottom right. You
can then exit the menu using the back arrow.

Basic settings

In the basic settings you can determine which
control icons should be visible on the main
screen and which functions should be active.
Tap the info button to the right of each set-
ting to get a description. This settings menu
is divided into two pages. You can switch bet-
ween the pages using the buttons with the
arrow (right or left).
NOTE: Changes must be saved on each page
by tapping the save icon.

Setting the melody

Touch the note symbol to enter the ringtone
setting menu. If an SD card with tones stored
on it is inserted, the SD card symbol is high-
lighted in blue and tapping on the "1" plays
the first ring tone stored on the SD card. If no
43
files are stored on the SD card or if no SD card
is inserted, the symbol is grey and the inter-
nally stored ringtones can be selected auto-
matically via the number field. The volume of
the ring tone can be adjusted via the "+" and
"-" keys.
NOTE: Audio data in wave or mp3 format can
be stored on the microSD card.
It is possible to assign an individual ring tone
to each connected outdoor unit. In this way,
it is possible to distinguish where the ringing
was from the ringing tone. The name of the
outdoor unit for which the ring tone is
currently set is shown in the upper part of the
menu. Use the arrow keys above and below
to switch between the outdoor units.

Help menu

Touch the Help button. Here you will find our
contact information as well as the QR code
for connecting to the app.

Picture Settings

Touch the picture settings icon to adjust the
brightness, colour saturation and contrast of
the live picture displayed.
44
ENGLISH | VDV-907

Connect WLAN

Tap the WLAN symbol to connect to a nearby
WLAN. In the following menu, all nearby
WLAN access points are displayed. Tap on
your WLAN and enter the WLAN key. Con-
firm the key by tapping the Enter key.
Wait a short time. If you mistyped the WLAN
key, the indoor unit indicates that the
connection is not successful and jumps back
to the input screen for the WLAN key and
you can check your entry and change it if ne-
cessary.
If the indoor unit indicates that the connecti-
on is successful, the name of your WLAN is
displayed in green at the top.
NOTE: It is not possible to set the network
manually, DHCP is always used.
To access the intercom with your smartpho-
ne, you need the Vistasmart or Aivisi app.
Call up the website https://www.vistasmart
.de with your smartphone and select the VDV
907 indoor unit.
GB