Activate Screen; Advanced Functions; Light; Arrow Symbol Right And Left - M-E Vistadoor Vistus VDV-907 Mode D'emploi

VDV-907 | ENGLISH

Activate screen

Touching the Talk button in standby activates
the screen and the voice connection, and the
live picture of the outdoor unit is
also displayed.

ADVANCED FUNCTIONS

(TOUCH buttons on the screen when ringing
or the talk button has been pressed)

Light

Using this button, a receiver from the CUVEO
series can be used to switch a light, for exam-
ple. For more information, see "Teaching the
GB
CUVEO receiver".

Arrow symbol Right and Left

If a second outdoor unit or an additional ca-
mera is connected in parallel, the two but-
tons can be used to switch to the next or pre-
vious outdoor unit/camera.

Alarm symbol

If this button is touched during an active call,
an alarm signal sounds at the outdoor unit.
Touching the button again or ending the call
deactivates the alarm tone.

Volume + and -

Touching the "+" button increases the speech
volume, touching the "-" button decreases
the speech volume.
NOTE: This setting is only temporary and is
reset to the basic volume after the call is en-
ded (see Basic volume setting).

Mute key

If the mute button is pressed during the call,
the microphone of the indoor unit is deacti-
vated and the visitor can no longer hear you.
To be able to speak with the visitor again,
touch the button once more. If no mute but-
ton is displayed, it has been deactivated in
the settings menu.

Camera button

If a microSD card for photos is inserted in the
indoor unit, a photo can be saved via this
button at any time while the picture is active.
To do this, simply tap this symbol.
41

PICTURE MEMORY AND SETTINGS

On pages 48-50 you will find an overview of
the structure of the OSD (On Screen Display).

Switching on the screen

If the indoor unit is in standby, you can switch
it on by touching the black screen area. The
camera picture is then displayed, the voice
connection to the outdoor unit is not activa-
ted here, but the sound from the outdoor
unit can be heard.
Once the screen has been activated, the
image memory (only if an SD card has been
inserted), the settings menu and the inter-
com function are available. Touch the back
arrow at the bottom left to switch the indoor
unit to standby mode.

Changing the name of the outdoor unit

Once the indoor unit has been activated by
touching the screen, you can change the
name of the outdoor unit to suit your prefe-
rences. To do this, simply touch the name of
the outdoor unit (A9) and then enter the
desired name. Confirm the entered name
with the Enter key.
42
ENGLISH | VDV-907

Switching between outdoor units

If several outdoor units are connected, you
can switch between them by tapping on the
arrows next to the name of the outdoor unit.

Picture memory

Touch the photo symbol at the bottom right
to view the contents of the picture memory
on the SD card. The following screen displays
a calendar with days on which pictures were
taken highlighted in colour. Touch the corre-
sponding day to view all pictures taken on
the selected day. Use the arrow keys to the
right and left of the picture to switch to the
next or previous picture.
previous picture.
Individual pictures can be deleted by tou-
ching the button with the dustbin symbol.
The image displayed in each case is deleted
without confirmation when the dustbin sym-
bol is touched. If you want to delete all stored
pictures at once, see the item
"Delete all photos".

Settings

You can access the settings menu if you have
switched on the screen by touching it and
then touch the button with the cogwheels.
GB