Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.3
Switching the clipper on and off
Fig. 4
6.4
Using the clipper
Approach the animal from the front.
X
X
Secure the animal to be clipped and calm it down.
X
X
Plug the power plug into the socket.
X
X
Switch the clipper on while you are in the visual range of the animal.
X
X
Select the desired speed (level I or II).
X
X
Observe the animal's behaviour while clipping.
X
X
Switch the clipper off after you have finished clipping and pull the plug
X
X
from the socket.
6.5
Replacing the clipping blades
Fig. 5
Fig. 6
12
0
I
II
Instruction Manual / Xperience 2-Speed cattle clipper
To switch the clipper on, slide the
X
X
ON/OFF switch to the position I or II.
To switch the clipper off, slide the
X
X
ON/OFF switch to the position 0 (see
Fig. 4).
Switch the clipper off by sliding the
X
X
switch to the position 0.
Pull the plug from the socket.
X
X
Turn the adjusting knob in the direc-
X
X
tion of the arrow until the resistance
decreases.
Place the clipper with the comb plate
X
X
screws facing upwards on a flat sur-
face.
Loosen the comb plate screws and
X
X
remove the clipping blades.
Publicité
Chapitres
Table des Matières
Dépannage
