Winkhaus panicLock AP4 Instructions D'installation page 99

Installation, Operating and
Maintenance Instructions
Step 3
Position the screw properly on
the side of the lock case and
tighten with a slotted screw-
driver (0.8 x 4.0). (max. 2.5 Nm).
After adjusting the direction
of escape
Carry out a function
and check for correct latch
retraction.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4
test
29 5062179
EN
3