Push Bar (Kmb.) - Winkhaus panicLock AP4 Instructions D'installation

Installation, Operating and
Maintenance Instructions
EN
Maximum door sash height: 2500 mm
Maximum door sash width: 1500 mm
All locks alternatively with 1.5 mm rreduced latch or alternatively with latch 9°
sloping surface. If the cylinder (PZ, RZ) standard or half-cylinder is the escape
door function of the lock is only guaranteed when the key is removed. The
closure may be equipped with a maximum of two additional bolt locks.
a) All locking cylinders with proof of suitability according to the FZG Test
Guideline Gütegemeinschaft locks and fittings e. V. as well as "profile
cylinder in accordance with EN 1303 (corrosion resistance class C)
5
generally with cam position ± 30°" may be used without further proof.
b) The closure may be equipped with a maximum of two additional bolt
locks.
c) An emergency power back up must ensure that the bolt always reaches
the end position in the event of a power failure.

5.4.1 Push bar (Kmb.)

No. Type no.
1 FSB 7980, 45°
2 ECO EPN 900
III, 45°
3 ECO EPN 900
IV, 45°
Order directly from the companies mentioned
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4
Codifica-
tion
DO 30.09
DO 30.03
DO 30.03
Notice: The push bar must have an angle of rotation of 45°!
Centre Rod
distance length
92 mm PZ ≤ 1150 mm
94 mm RZ
UG
92 mm PZ ≤ 1350 mm
94 mm RZ
UG
92 mm PZ ≤ 1350 mm
94 mm RZ
UG
58 5062179
Handhold
stainless steel,
aluminium
stainless steel,
steel
stainless steel,
steel,
zinc diecast