Daily Use - Zanussi ZDSN653X2 Notice D'utilisation

Masquer les pouces Voir aussi pour ZDSN653X2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Carefully shake the funnel by its handle to get
the last granules inside.
5. Remove the salt around the opening of the salt
container.
6. Turn the cap of the salt container clockwise to
close the salt container.
CAUTION! Water and salt can come
out of the salt container when you fill
it. After you fill the salt container,
immediately start a programme to
prevent corrosion.
HOW TO FILL THE RINSE AID DISPENSER

DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
12
A
B
A
+
-
C
D
CAUTION! The compartment (A) is for
rinse aid only. Do not fill it with
detergent.
CAUTION! Only use rinse aid
designed specifically for dishwashers.
1. Press the release button (D) to open the lid
(C).
2. Fill the dispenser (A) until the rinse aid reaches
the marking ''MAX''.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the release button
locks into position.
You can turn the selector of the
released quantity (B) between position
1 (lowest quantity) and position 4 or 6
(highest quantity).
Make sure that the appliance is in programme
selection mode.
If the salt indicator is on, fill the salt
container.

Publicité

Table des Matières
loading

Table des Matières