Table des Matières
Publicité
32
31
30
29
E-E
70
71
72 73 74 75
76
77
78
69
79
68
80
67
81
66
65
64
63
62
61
57
60
56
59
55
58
FIG. 8
LONGITUDINAL SECTION
COUPE LONGITUDINALE
SCHNITTZEICHNUNG
SECCIÓN LONGITUDINAL
SEZIONE LONGITUDINALE
28
27
26
25
E
24
23
22
E
21
20
19
18
17
16
15
14
13
12
11
51
10
52
09
53
08
54
07
06
05
04
03
02
01
41
33
1. GENERAL CHARACTERISTICS
34
35
– Application range: is suitable both for compression of electrical connectors on conduc-
36
37
38
– Crimping force: ........................................................................... 130 kN (14.6 sh ton)
39
40
– Rated operating pressure: ........................................................ 700 bar (10,000 psi)
41
42
– Dimensions: length ................................................................... 488 mm (19.2 in.)
43
44
45
– Weight (without dies): ....................................................................5,4 kg (11.9 lbs)
46
47
48
50
– Recommended oil: ............................... AGIP ARNICA 32
49
– Operating positions. The three operating positions are identifi ed on the main handle,
Serial number
which rotates relative to the reference symbol,
Numéro de série
Seriennummer
Número de serie
Numero di matricola
– Advancing speed. The tool has two forward speeds of the ram and automatically
switches from a fast advancing speed of dies to a slower crimping speed.
– Safety. The tool is provided with max pressure valve; MPC1 special manometer, is
available upon request to check the correct setting of the valve.
*
The HT131-UC tool is the HT131-U tool fi tted with adaptor AU130-C (Refer to Fig. 2).
2
HYDRAULIC CRIMPING TOOLS
HT131-U and HT131-UC *
tors up to 400 mm
2
(800 MCM) and aluminium conductors up to
300 mm
2
(600 MCM) .
width with handles closed .................................... 149 mm (5.8 in.)
width with handles open ....................................... 349 mm (13.7 in.)
SHELL TELLUS TX 32
(see Fig. 1).
Rest position (Handles locked): lock handles together when
tool is not in use.
Release position: close the moveable handle (53) against the
main handle (04), in order to discharge the oil pressure and
retract the dies.
Operating position: operate the moveable handle (53), to build
up pressure and close the dies.
ENGLISH
or
or equivalent
Publicité
Table des Matières
