John Bean EHP System IV-E Manuel D'utilisation page 8

8-EN
1.1-1
16
1.0 Introduction
Congratulations on purchasing the "EHP System IV"
electric/air tire changer.
This tire changer is designed for ease of operation,
safe handling of rims, reliability and speed.
This combination of features means more profit and
added versatility for your shop, enabling you to work
with aluminium or magnesium alloy wheels without
damaging customer's rims.
With a minimum of maintenance and care your tire
changer will provide many years of trouble-free
operation.
Please read this manual thoroughly before operating
the unit. Instructions on use, maintenance and
operational requirements of the machine are covered
in this manual.
STORE THIS MANUAL IN A SAFE PLACE FOR
FUTURE REFERENCE. READ THIS MANUAL
THOROUGHLY BEFORE USING THE MACHINE.
1.1 Nomenclature
Before installing and using the electric/air tire changer
it is suggested that you become familiar with the
nomenclature of the machine's components (Fig.
1.1-1).
1 Vertical slide
2 Mounting arm, (horizontally displaceable)
3 Lock push-button
4 Handle
5 Mount/demount tool
6 Tower or column
7 Turntable
8 Clamping jaws (multi-position)
8a Air Jets
9 Bead breaker arm
10 Bead breaker blade
11 Bead breaker pad
12 Bead lifting tool
13 Foot pedal controls
14 Bead seater/inflator pedal
15 Inflation gauge
16 Main switch for 230 VAC versions only
CAUTION: WE RECOMMEND SWITCHING OFF THE
UNIT AT THE END OF EACH WORKING DAY.
ALL ELECTRICAL CONNECTIONS SHALL BE
PERFORMED BY A LICENCED TECHNICIAN.
ALL SERVICE MUST BE PERFORMED BY AN
AUTHORIZED SERVICE TECHNICIAN.