John Bean EHP System IV-E Manuel D'utilisation page 5

SAFETY INFORMATION
For your safety, read this manual thoroughly before operating the EHP System IV E Tire Changer
The EHP System Series Tire Changers are
intended for use by properly trained auto-
motive technicians. The safety messages
presented in this section and throughout
the manual are reminders to the operator
to exercise extreme care when changing
tires with these products.
There are many variations in procedures,
techniques, tools, and parts for changing
tires, as well as the skill of the individual
doing the work. Because of the vast num-
ber of wheel and tire applications and
potential uses of the product, the manufac-
turer cannot possibly anticipate or provide
advice or safety messages to cover every
situation. It is the automotive technician's
responsibility to be knowledgeable of the
wheels and tires being changed. It is es-
sential to use proper service methods and
change tires in an appropriate and accept-
able manner that does not endanger your
safety, the safety of others in the work area
or the equipment or vehicle being serviced.
It is assumed that, prior to using the EHP
System Tire Changers, the operator has
a thorough understanding of the wheels
and tires being changed. In addition, it is
assumed he has a thorough knowledge
of the operation and safety features of
the rack, lift, or floor jack being utilized,
and has the proper hand and power tools
necessary to service the vehicle in a safe
manner.
Before using the EHP System Series Tire
Changers, always refer to and follow the
safety messages and service procedures
provided by the manufacturers of the
equipment being used and the vehicle
being serviced.
IMPORTANT !! SAVE THESE INSTRUCTIONS — DO NOT DISCARD !!
EN-5