Spare Parts And Accessories; Disposal; Disposing Of Kombimotor; Ec Declaration Of Conformity - Stihl KMA 130 R Notice D'emploi

20 Spare Parts and Accessories

STIHL FS-KM
A combination of KombiMotor and STIHL FS-KM may be
used with the following cutting attachments:
Mowing head with 2.4 mm diameter "round, quiet" nylon line:
– AutoCut 25-2 mowing head
– AutoCut C 26-2 mowing head
– DuroCut 20-2 mowing head
– FixCut 31-2 mowing head
– PolyCut 27-3 mowing head
– SuperCut 20-2 mowing head
– TrimCut 31-2 mowing head
Mowing head with 2.7 mm diameter "round, quiet" nylon line:
– AutoCut 36-2 mowing head
Metal cutting attachments:
– Grass cutting blade 230-2
– Grass cutting blade 230-4
– Grass cutting blade 230-8
– Grass cutting blade 260-2
– Brush knife 250-3
Deflectors, handles and carrying systems that must be used
with the above cutting attachments are listed in the STIHL
FS-KM instruction manual.
20 Spare Parts and Accessories
20.1 Spare Parts and Accessories
These symbols identify original STIHL
replacement parts and original STIHL
accessories.
0458-805-9621-A
STIHL recommends the use of original STIHL replacement
parts and accessories.
Original STIHL replacement parts and original STIHL
accessories are available from STIHL servicing dealers.

21 Disposal

21.1 Disposing of KombiMotor

Information on disposal is available from STIHL servicing
dealers.
► Dispose of the KombiMotor, accessories and packaging in
accordance with local regulations and environmental
requirements.

22 EC Declaration of Conformity

22.1 STIHL KMA 130 R KombiMotor

ANDREAS STIHL AG & Co. KG
Badstrasse 115
D-71336 Waiblingen
Germany
declare in exclusive responsibility that
– Category: Cordless KombiMotor
– Make: STIHL
– Model: KMA 130 R
– Serial identification: 4867
conforms to the relevant provisions of Directives 2011/65/
EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and has
been developed and manufactured in conjunction with the
KombiTools listed in this instruction manual to comply with
the following standards in the versions valid on the date of
production: EN 55014-1, EN 55014-2, EN 60335-1,
EN 60745-1 and EN ISO 12100 taking into account the
standards EN 60335-2-72, EN 50636-2-91,
EN 50636-2-100, EN 60745-2-13 and EN 60745-2-15.
English
47