Operating The Kombimotor; Holding And Controlling The Kombimotor; Selecting Power Level; Operation - Stihl KMA 130 R Notice D'emploi

Masquer les pouces Voir aussi pour KMA 130 R:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

English
► If the KombiTool continues to run: Pull connecting cable
plug out of the socket and contact your STIHL dealer for
assistance.
The KombiMotor has a malfunction.

11 Operating the KombiMotor

11.1 Holding and Controlling the KombiMotor

The correct way of holding and controlling the KombiMotor
depends on the KombiTool you are using.
► Hold and control the KombiMotor as described in the
instruction manual supplied with the KombiTool.

11.2 Selecting Power Level

One of three power levels can be selected to suit the
application. The LEDs indicate the selected power level. The
higher the power level, the faster the KombiTool can run.
The selected power level affects the battery's runtime. The
lower the power level, the longer the runtime.
1
► Push the release slide (1) in the direction of the loop
handle with your thumb and hold it there.
The LEDs indicate the selected power level.
► Push the release slide (1) forwards, hold it briefly in that
position and allow it to spring back.
This selects the next power level. Power level 3 is followed
by power level 1, then 2, 3, etc.
42
► Push the release slide (1) forwards and allow it to spring
back as many times as necessary to select the required
power level.
Every KombiTool can be operated with all three power
levels.

11.3 Operation

The method of operating the KombiMotor depends on the
KombiTool you are using.
► Operate the KombiMotor as described in the instruction
manual supplied with the KombiTool.

12 After Finishing Work

12.1 After Finishing Work
► Switch off the KombiMotor and pull the connecting cable
plug out of the socket.
► If the KombiMotor is wet: Allow the KombiMotor to dry.
► Clean the KombiMotor.

13 Transporting

13.1 Transporting the KombiMotor

► Switch off the KombiMotor and pull the connecting cable
plug out of the socket.
► Carry the KombiMotor properly balanced by the drive tube
with the KombiTool behind you.
► Transporting the KombiMotor in a vehicle: Secure the
KombiMotor so that it cannot turn over or move.
11 Operating the KombiMotor
0458-805-9621-A

Publicité

Table des Matières
loading

Table des Matières