Switching The Kombimotor On/Off; Switching On; Switching Off; Checking The Kombimotor - Stihl KMA 130 R Notice D'emploi

9 Switching the KombiMotor On/Off

9 Switching the KombiMotor On/Off
9.1

Switching On

► Hold the KombiMotor with your right hand on the control
handle – wrap your thumb around the control handle.
► Hold the KombiMotor with your left hand on the loop
handle – wrap your thumb around the loop handle.
1
3
► Push the release slide (1) in the direction of the loop
handle with your thumb and hold it there.
► Depress the trigger lockout (2) with your hand and hold it
there.
You can let go of the release slide (1).
► Pull the trigger (3) with your index finger and hold it there.
The KombiMotor accelerates and the KombiTool runs.
The more you depress the trigger, the faster the KombiTool
runs.
9.2

Switching Off

► Release the trigger and trigger lockout lever.
► Wait until the KombiTool comes to a standstill.
► If the KombiTool continues to run: Pull connecting cable
plug out of the socket and contact your STIHL dealer for
assistance.
The KombiMotor has a malfunction.
0458-805-9621-A
1
2

10 Checking the KombiMotor

10.1 Checking the Controls

Release slide, trigger lockout and trigger
► Pull the connecting cable plug out of the socket.
► Attempt to pull the trigger lever without depressing the
release slide and the trigger lockout.
► If the trigger can be pulled: Do not use your KombiMotor
and contact your STIHL servicing dealer for assistance.
Release slide or trigger lockout is faulty.
► Push the release slide in the direction of the loop handle
and hold it there.
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger.
► Release the trigger and trigger lockout lever.
► If the trigger or trigger lockout is stiff or does not spring
back to the idle position: Do not use your KombiMotor and
contact your STIHL servicing dealer for assistance.
Trigger or trigger lockout is faulty.
Switching on the KombiMotor
► Insert the connecting cable plug.
► Push the release slide in the direction of the loop handle
and hold it there.
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger and hold it there.
The KombiTool runs.
► If 3 LEDs flash red: Pull connecting cable plug out of the
socket and contact your STIHL dealer for assistance.
There is a malfunction in the KombiMotor.
► Release the trigger and trigger lockout lever.
The KombiTool stops running.
English
41