7 Adjusting KombiMotor for User
► Arrange the connecting cable so that it is as short as
possible without hindering your work.
7.1.2
Fitting and Adjusting the Carrying System
► Put the battery on your back.
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
► Tighten the straps until the waist belt fits snugly on your
hips and the back padding is against your back.
► Thread the end of the waist belt through the loop (3).
► Fit the hip pad as described in the instructions supplied
with the hip pad.
0458-805-9621-A
1
3
2
► Adjust the strap (1) so that the carabiner (2) is about a
hand's width below your right hip.
7.2
Using with Carrying System
7.2.1
Fitting and Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted to suit the
user's size and the application.
1
2
The connecting cable can be fitted through the following
openings:
– the upper left opening (1)
– the upper right opening (2)
– the lower left opening (3)
– the lower right opening (4)
English
1
3
4
37