Yamaha WaveRunner FX140 Manuel D'entretien page 768

TRBL
OPERATING
ANLS E
SELECTING COMMANDS FROM THE MAIN MENU
Eight commands appear in the Main Menu. Select a command in any of the following three ways.
Two ways to select command:
• Move the mouse pointer over the selected command (a or b) until it appears as a finger mark,
and then click the selected command.
• Press the number key (1–8) corresponding to the selected command.
Fig. 24
1 Main menu
NOTE:
If the Main Menu is displayed and the engine is turned off, electric power is supplied to the ECM for
30 minutes and commands can be carried out.
9-18