Drainage Of Water Tank - Oceanic OCEACLIM110W Guide D'utilisation

B. Drainage of water tank
During the cooling and dehumidifying process, the appliance extracts humidity
from the atmosphere and keeps the condensed water in an internal recycling
tank inside the appliance. When the water tank is full, the appliance stops
operating until the water is emptied from the appliance. You can observe these
indicators:
- an "FL" code displayed on LED
- the "Water Full" LED lit up in red
- alarm ringing
To drain water from the internal tank, please follow these steps:
1) Move the unit to the washroom or draining ditch
2) Remove the plug by unscrewing it in anti-clockwise direction:
3) Tilt the appliance to pour water out
4) Screw the plug back to the appliance in clock-wise direction
Caution: When the water tank is full, move the air conditioner steadily to avoid
water spilling on the ground from the internal tank.
Fig. 19
59
Fig.20