afx light 6CUBE-FX Manuel D'utilisation page 8

(3) Press <Enter> to confirm, or press "MENU" to exit.
[Blue]：(1)Press <Enter> to select [Blue]
(2)Press<Up/Down> choose '000~255'
(3)Press <Enter> to confirm, or press "MENU" to exit.
[White]：(1)Press <Enter> to select [Whit]
(2) Press <Up/Down> choose '000~255'
(3) Press <Enter> to confirm, or press "MENU" to exit.
[Strobe]：(1)Press <Enter> to select [Stro]
(2)Press<Up/Down> choose '000~255'
(3)Press <Enter> to confirm, or press "MENU" to exit.
[Dimmer]：(1)Press <Enter> to select [Dim]
(2)Press<Up/Down> choose '000~255'
(3)Press <Enter> to confirm, or press "MENU" to exit.
[LED]：(1)Press <Enter> to select [led]
(2)Press<Up/Down> choose '000~255'
(3)Press <Enter> to confirm, or press "MENU" to exit.
12) LED setting
1. Press MENU.
2. Press UP/DOWN to choose [LED], press ENTER
3. Press<Up/Down> to choose 'ON' or 'OFF'
4. Press <Enter> to confirm, or press "MENU" to exit.
13) Display reverse setting
1. Press MENU.
2 .Press UP/DOWN to choose [Disp], press ENTER
3. Press<Up/Down> to choose 'ON' or 'OFF'
4. Press <Enter> to confirm, or press "MENU" to exit.
14) Whole test
1. Press < ENTER>
2. Press < UP/DOWN> to select [Test], then press < ENTER> to do the whole test
3. Press <Enter> to confirm, or press "MENU" to exit.
15) Operating time
1. Press < ENTER>
2. Press < UP/DOWN> to select [Fhrs], then press < ENTER> to check the light's working time
3. Press <Enter> to confirm, or press "MENU" to exit.
16) Software Version
1. Press < ENTER>
2. Press < UP/DOWN> to select [Ver], then press < ENTER>to check the light's version information
3. Press <Enter> to confirm, or press "MENU" to exit.
17) Whole reset
1. Press< MENU>
2. Press UP/DOWN to choose [Rest], then press ENTER
3. After reset, it will go back to the MENU display
18) Restore factory settings
1. Press MENU.
2. Press UP/DOWN to choose [Defa], then press ENTER
3. Press<Enter> to confirm, or press "MENU" to exit.
©Copyright LOTRONIC 2016 6CUBE-FX Page 8