afx light 6CUBE-FX Manuel D'utilisation page 6

MENU operation
This fixture has 4 buttons on the front panel to access, edit and set all functions.
[MENU]: press MENU key to enter into the submenus. Press MENU again to leave the sub-menu. If no key is ressed
during 30 seconds, the unit will go back to MENU display automatically.
[Up]: press UP key to increase the displayed values. Keep pressed to increase the values quickly.
[Down]：press DOWN key to decrease the displayed values. Keep pressed to decrease the values quickly.
[ENTER]：in normal status, this button has no function. In edit mode, press ENTER to enter into the sub-menu.
Function setting
1) DMX address setting
1. Press <MENU>
2. Press <UP/DOWN> to choose, then pres <ENTER> to enter [Addr]
3. Press <Up/Down> to choose address 001~XXX
4. Press <ENTER> to confirm, or press "MENU" to exit
2) Channel Setting
1. Press <MENU> to enter EDIT interface
2. Press <UP/DOWN> to choose [Chnd], press ENTER
3. Press UP/DOWN to choose the channel mode '14CH' or '16CH'
4. Press ENTER to confirm, or press "MENU" to exit
3) Scene mode (before this setting, press MENU, select < Lost>, select <Soun> or <Auto>and save. The unit must be
set to Sound/Auto Mode first)
1. Press <MENU> to enter EDIT interface
2. Press< UP/DOWN> to choose [Shnd] and press ENTER
3. Press< UP/DOWN> to choose Sh1, Sh2, Sh3 (can choose any scene mode to operate)
4. Press <Enter> to confirm, or press "MENU" to exit.
4) Master-slave setting
1. Press <MENU> to enter EDIT interface
©Copyright LOTRONIC 2016
Red
Gren
Blue
Whit
Stro
Dim
Led
disp
Test
Fhrs
Ver
Rest
defa
led
on
off
on
off
6CUBE-FX
Red Manual test 000~255
Green Manual test 000~255
Blue Manual test 000-255
White Manual test 000-255
Strobe Manual test 000-255
Dimmer Manual test 000-255
Led Manual test 000-255
LED black out on
LED black out off
Display reverse on
Display reverse off
Whole Function Test
Operate Time
Software Version
Whole Reset
Default
Page 6