afx light 6CUBE-FX Manuel D'utilisation page 7

2. Press <UP/DOWN> to choose [SLnd], press ENTER
3. Press <UP/DOWN> to choose Mast/SL1.
4. Press <Enter> to confirm, or press "MENU" to exit.
5) DMX Lost Setting
1. Press< MENU> to enter EDIT interface
2. Press <UP/DOWN >to choose [Lost], press ENTER
3. Press< UP/DOWN> can choose the operating mode: hold, soun, Auto, blac (you
can choose any scene mode to operate)
4. Press <Enter> to confirm, or press "MENU" to exit.
7）Sound sensitivity Setting (before this setting, press MENU, select < Lost>, select <Soun> and save. You must be in
Sound Mode first, before you can select the sensitivity)
1. Press MENU
2. Press UP/DOWN to choose [Sens], press ENTER
3. Press <Up/Down>, <Enter> to adjust the sound sensitivity from 0%-99%.
4. Press <Enter> to confirm, or press "MENU" to exit.
8) Pan angle setting
1. Press<MENU>.
2. Press UP/DOWN to choose [Angl], press ENTER
3 Press<Up/Down> to choose '630' or '540'
4. Press <Enter> to confirm, or press "MENU" to exit.
9) Pan reverse setting
1. Press<MENU>.
2. Press UP/DOWN to choose [Pint], press ENTER
3 Press<Up/Down> to choose 'YES' or 'NO'
4. Press <Enter> to confirm, or press "MENU" to exit.
10) Tilt reverse setting
1. Press<MENU>
2. Press UP/DOWN to choose [Tint], press ENTER
3 Press<Up/Down> to choose 'YES' or 'NO'
4. Press <Enter> to confirm, or press "MENU" to exit.
11) Manual test
1. Press MENU
2. Press UP/DOWN to choose [Manu], press ENTER
3. Press <Up/Down>, to choose [PAN], [TIL], [TIL2], [Red], [Gren], [Blue], [Whit], [Stro], [Dim], [LED]
[PAN]：(1)Press <Enter> to select [PAN]
(2) Press <Up/Down> to choose '000~255'
(3) Press <Enter> to confirm, or press "MENU" to exit.
[TILT]： (1)Press<Enter> to select [TIL]
(2) Press<Up/Down> to choose '000~255'
(3) Press <Enter> to confirm, or press "MENU" to exit.
[TILT2]: (1)Press<Enter> to select [TIL2]
(2) Press<Up/Down> to choose '000~255'
(3) Press <Enter> to confirm, or press "MENU" to exit.
[Red]：(1)Press <Enter> to select [Red]
(2) Press <Up/Down> to choose '000~255'
(3) Press <Enter> to confirm, or press "MENU" to exit.
[Green]: (1) Press <Enter> to select [Gren]
(2) Press <Up/Down>, Choose '000~255'
©Copyright LOTRONIC 2016 6CUBE-FX Page 7