Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Details:
- Start of recording as a time
- File size
- Length of recording
-Triggered by motion (motion detection) or by a
schedule (Event:Schedule)
!
To delete a recording, on iOS, press the recycle bin icon [x] and confirm
with "YES" and, on Android, press the cog icon and then the recycle bin
icon.
!
To play back a recording, press the " " icon.
!
To stop the playback prematurely, press "Back" (iOS) or the "Return"
button (Android).
12.2 Settings [40 - Settings]
N.B.:
Any changes made in the settings must be saved by pressing "Save".
12.2.1 System information [44 - View System Information and Status]
Here you will find information about the camera:
#
Device ID
= SSID
#
Alias:
The factory-set name of the camera
#
Firmware Version:
The camera's firmware version
#
Web UI Version:
Version of the Web user interface
#
Alarm:
"None" - detection of motion does not trigger an automatic
recording, "Motion Detection" - detection of motion will trigger
automatic recording.
#
Record:
"None" - detection of motion does not trigger an a recording
based on a pre-set schedule, "Recording..." - detection of motion will
trigger a recording based on a pre-set schedule.
#
Storage:
Percentage of free memory on the micro-SD card
#
NTP:
"No Action" - no synchronisation with the NTP Server, "Succeed" -
synchronisation with the NTP Server is activated (see "Time zone")
12.2.2 Date and time [45 - Time Zone Settings]
#
Sync with NTP Server:
To ensure synchronisation with the actual time in your location and the
date, keep "Sync with NTP Server" set to ON (synchronisation activated).
Factory setting: ON
#
NTP Server:
Selecting the NTP Server: Keep the factory setting
#
Time Zone:
Set the time zone of your location (e.g.: Germany: GMT+01:00.)
Factory setting: GMT+01:00
#
Daylight Saving Time:
To adjust the time according to the changing clocks, select "+ 1 hour"
for Daylight Saving Time and "None" for the standard time during the
winter.
Factory setting: None
Note:
Don't for get to save your changes with "Save" when you are done.
12.2.3 Camera password [46 - Password]
Here you can change the camera password to access the camera.
·
"time.nist.gov".
Under "Password", delete the current camera password (factory setting:
123456) and, on iOS, also confirm with "Done".
!
Enter the new camera password and confirm with "Save".
!
Note down the camera password and keep it in a safe place. If you lose the
password, perform a reset (Chapter 14).
Note:
Once the camera password has been changed, no mobile device will have
complete access to the camera any longer, and after launching the app, it is no
longer possible to access the camera. To regain full access, you must delete the
current camera password under "Edit" in the menu of the corresponding mobile
device (see Chapter 11.5), enter the new password and confirm with "Save".
12.2.4 IP settings [47 - IP Settings]
factory setting ON
Keep the
.
12.2.5 WLAN settings [48 - WLAN Settings]
Here you can find all settings for your chosen WLAN connection to the router. In
general, it is
not necessary
to change these settings.
12.2.6 Email following motion detection [49 - Mail Settings]
You can pre-set up to four email addresses to which an email with up to ten
images is to be sent following motion detection. We recommend that you set up
a dedicated Google Mail account to send these emails to (e.g.
SamSample@gmail.com).
!
Complete or select following fields marked with * in order to be able to
all
send emails.
!
To check whether you have entered all details correctly, press the "Test"
field. If all details are correct, all entered recipients will receive a test email.
!
Save all details with "Save".
#
Send Alarm Mail:
Here you can specify whether an email is to be sent
following motion detection ("ON") or not ("OFF"). If "ON" is selected, the
setting "Number of pictures attached" will also appear. This is where you
can specify how many images you would like to be attached to the email
(this may be 1 to 10 images).
Factory setting: OFF
#
Sender's Email :
*
Enter your email address from which you want the
emails to be sent here, and confirm with "Done" (e.g.
SamSample@gmail.com).
#
Receiver1/2/3/4 Email :
*
email is to be sent following motion detection, and confirm with "Done".
#
SMTP Server :
*
Enter your provider's server data for outgoing emails (for
Google Mail: smtp.gmail.com) and confirm with "Done".
#
SMTP Port :
*
Select the appropriate port of your provider (for Google Mail:
587) and confirm with "Done".
#
Transport Layer Security Protocol*:
security of your provider (for Google Mail: STARTTLS) and confirm with
"Done".
#
Need Authentication :
*
Keep "ON"
Factory setting: ON
#
Sender's SMTP Account :
*
want the emails to be sent here, and confirm with "Done".
Enter up to four email addresses to which an
Select the appropriate transport layer
Re-enter your email address from which you
GB - 37
Publicité
Table des Matières
