Do not look directly into the light source (lamp, LED, etc.). Do not
look into the light source (lamp, LED, etc.) with an optical instrument
(e.g. magnifier).
Operation
Mounting the light
Remove the packaging materials.
Model 54687 / 54688 / 54693 / 54694
Insert the lamp arm
it locks into place (see Fig. B). Be sure the cable opening on the
lamp arm
2
Screw the illuminant
Use the locking screw
Fig. A).
Model 54689 / 54691 / 54695 / 54696
If the illuminant
socket.
Using the lamp
Completely unwrap the power cord
Insert the mains plug into the socket.
Turn the light on and off with the on / off switch.
Model 54687 / 54688 / 54693 / 54694
Adjust the lamp head
into the opening in the lamp base
2
faces the narrow edge on the lamp base
clockwise into the socket (see Fig. C).
6
to adjust the tilt of the lamp head (see
7
is not yet installed, screw it clockwise into the
6
and the lamp arm
1
.
4
as desired.
2
until
3
.
3
GB/IE/NI
11