Operation; Switching The Lamp On Or Off; Switching The Alarm On And Off; Activating The Alarm - LIVARNO LUX 55011 Instructions D'utilisation Et Consignes De Sécurité

Initial use / Operation
The symbol in the function display will stop
flashing and stay on.
Note: You can change the unit of temperature
(° C or ° F) at any time by pressing the
ton .
9
You can switch between the 12-hour and
24-hour mode at any time by pressing the
button .
9

Operation

Use the flexible lamp head
LED lamp.

Switching the lamp on or off

The lamp has three brightness settings:
1. Touch the touch switch
on the LED lamp
1
2. Touch the touch switch
to increase the brightness.
3. Touch the touch switch
increase the brightness more.
4. Touch the touch switch
switch the LED lamp

Switching the alarm on and off

Activate the alarm (see "Activating the alarm").
The alarm will sound at the set time.
Touch any button (
of the lamp to switch off the alarm sound.
With the snooze function activated, the
symbol will appear in the function display. The
alarm will sound again after the set snooze
time (max. 2 x).

Activating the alarm

Press the Mode button
mode to alarm mode. A beep will sound and the
symbol will appear in the function display
20 GB/IE
but-
to adjust the
2
once to switch
4
.
a second time
4
a third time to
4
a fourth time to
4
off.
1
, , ) on the bottom
6 7 9
to switch from time
6
The time
15
rent alarm time or current date, respectively.
If applicable, press the
times to activate or disable the respective function:
• symbol
The alarm function is activated.
• symbol
The snooze function is activated.
Press the Mode button
mode to time mode. A beep will sound. The
symbol will go out and in addition to the
symbols for the respective selected functions, the
will appear in the function display.
If no changes are made for 60 seconds, the LC
display will automatically revert from alarm
3
mode to time mode.
Setting the alarm time, snooze
time and alarm sound
1. If applicable, press the Mode button
switch from time mode to alarm mode. A beep
will sound and the
function display
show the current alarm time.
2. Press the Select button
A beep will sound, the top line in the time dis-
play will flash, and the
the function display.
3. Use the /
4. Press the Select button
A beep will sound, the bottom line in the time
display will flash, and the
in the function display.
5. Use the /
6. Press the Select button
A beep will sound, the bottom line in the time
display will flash, and the
in the function display.
7. Use the /
(in minutes).
8. Press the Select button
A beep will sound, the bottom line in the time
display will flash, and the
. in the function display.
14
and date display show the cur-
16
/ button
appears in the function display:
also appears in the function display:
to revert from alarm
6
symbol will appear in the
. The time display
14
:
7
symbol will flash in
button to set the hour.
9
to confirm the setting.
7
symbol will flash
button to set the minute.
9
to confirm the setting.
7
symbol will flash
button to set the snooze time
9
to confirm the setting.
7
symbol will flash
several
9
/
to
6
will
15