Clock Status; Synchronization Status - Gorgy Timing HANDI 300 Mode D'emploi

5.2. CLOCK StatUS

5.2.1. Clock status
► When the clock loses communication with the PC, the frame at the bottom of the
interface displays the following message:
► When the user clicks the "set up" button, the bottom part of the interface informs
that new configurations were sent to the clock.

5.2.2. Synchronization status

► synchronization status of the clock will be displayed in this zone..
► Commuting
This status indicates that the clock is changing its time server.
Detecting
►
This status indicates that the clock is searching for a time server.
► Learning
This status indicates that the clock is communicating with the time server.
► tracking
This status indicates that the clock is synchronized with the time server.
► Idle
This state is displayed when the clock is started and indicates that it is waiting the
result of the time server search.
► Detect fail
This status indicates that the clock is unable to detect a time server.
46 MDE-HANDI-2078V2.0