Connections; Configuration Via The Clock (Buttons); Advanced Settings - Gorgy Timing LEDi ORiGiNAL Mode D'emploi

☛
Fix the clock on its bracket before connecting it to mains power.
► Connect the clock to mains.
► Start the clock running, by tipping the switch located on the back of the clock, to "ON"
(low position).
☛
Only the central display is shown on the following synoptic.

5.1. ADVANCED SETTiNGS

example: For France, you shall put:
► Sign of the offset: dt +
► Offset value: 100
► DST setting: EU (Europe)
14
5. CONFiGURATiON ViA ThE CLOCK
▼ Symbol means that the digit is flashing.
Date -
PROG 4 sec.
+ / -
Offset sign
PROG
+ / -
Offset value
PROG
+ / -
Setting of DST
PROG
+ / -
Setting of time format
PROG
+ / -
Synchronisation
PROG
Date - time display
time display
000 : Offset of 0 hours 0 minutes
030 : Offset of 30 minutes
100 : Offset of 1 hour
130 : Offset of 1 hour 30 minutes
...
OFF : No DST
EU : Europe
US : North America
AU : Australia
12hh : 12 hour mode
24HH : 24 hour mode
setting
ASCII : ON ↔ OFF
MDE-LEDI-ORIGINAL-1101V3.0
4.

CONNECTiONS

(BUTTONS)
This setting has no effect
on this product