Ntp Parameters - Gorgy Timing HANDI 300 Mode D'emploi

5.1.3. ntP parameters

► This page also allows us to configure the time server on which the clock will be synchro-
nizeed. The user can choose an automatic detection of the time servers on the network
or specify himself a list of servers.
► The user can also enter the server encryption keys on the right side of the interface. To
enter these keys, see section 5.1.4. Encryption keys.
► This page also shows the iP address and time server status on which the clock is syn-
chronized.
trying
►
This information indicates that the clock is trying to synchronized to this time server.
► active
This information indicates on which server the clock is synchronized.
44 MDE-HANDI-2078V2.0