Dcf Receiver Version; Dhw (869 Mhz) Receiver Version; Ntp Receiver Version - Gorgy Timing HANDI 300 Mode D'emploi

2.2.4. DCF RECEIVER VERSIOn

► Depending on the power supply option, connect the clock to the mains.
☛
The hands are positioned at 12 o'clock and then, 3 to 4 minutes after
receiving the code, are positioned according to the received time information.
☛

2.2.5. DhW (869 Mhz) RECEIVER VERSIOn

► Change the switch position on the back onto the "On" position.
☛
The hands are positioned at 12 o'clock and then, 2 to 3 minutes after
receiving the code, are positioned according to the received time information.

2.2.6. ntP RECEIVER VERSIOn

a/ 230VaC version
► Connect the clock to the computer network.
► Connect the clock to the mains.
► Change the switch position on the back onto the "On" position.
B/ POE version
► Connect the clock to the POE injector.
► Change the switch position on the back onto the "On" position.
☛
The hands are positioned at 12 o'clock and then, 3 to 4 minutes
after receiving the code, are positioned according to the received time
MDE-HANDI-2078V2.0
To reset, open the clock and press the "reset" button once.
information. For the advanced configuration,
see section 5. WEB INTERFACE.
31