Ascii Rs485 Receiver Version - Gorgy Timing HANDI 300 Mode D'emploi

2.2.7. aSCII RS485 RECEIVER VERSIOn

► Connect the asCii code by following the following table:
► Connect the clock to the mains.
► Change the switch position on the back onto the "On" position.
3 to 4 minutes after receiving the code, are positioned according to the
a/ Gorgy timing Protocol
► Receiver mode
in this mode the clock is running in standalone mode but sets the time earlier com-
pared with the asCii code received (confguration: 2400 bits, format 8 bits, parity
pair, 1 stop bit).
► The time information is in the form below:
StX D a Y 10D
Byte nr Field Size
1 StX
2,3,4 D,a,Y
5
6,7 10D,D
8 /
9,10 10M,M
11
12,13 10Y,Y
14,15
16,17 10h,h
18
19,20 10m,m
21
22,23 10S,S
24 CR
32
Green wire
Brown wire
White wire
☛
The hands are positioned at 12 o'clock and then,
received time information.
D / 10M M
Value/Meaning
1 Start of text ($02) – mark the beginning of the frame.
the day in the week in a human-readable way (MOn, tUE, WED, thU, FRI,
3
Sat, SUn for Monday to Sunday)
1 Space character ($20)
2 Day in the month on two aSCII characters ($30,$31 to $33,$31)
1 Forward slash character ($2F)
2 Year on two aSCII characters ($30,$30 for 2000 – $39,$39 for 2099)
1 Forward slash character ($2F)
2 Year on two aSCII characters ($30,$30 for 2000 – $39,$39 for 2099)
2 two Space characters ($20)
2 hours on two aSCII characters ($30,$30 to $32,$33)
1 Colon character ($3a)
2 Minutes on two aSCII characters ($30,$30 to $35,$39)
1 Colon character ($3a)
2 Seconds on two aSCII characters ($30,$30 to $35,$39)
1 Carriage Return ($0D) – mark the end of the frame
GnD
RX-
RX+
/ 10Y Y 10h h : 10m m : 10S S
MDE-HANDI-2078V2.0
CR