Water Filter Indicator - Jennair W10779525B Guide D'utilisation Et D'entretien

INTRODUCTION INTRODUCTION
Electronic Controls with LED Dis-
play
Allow independent control of refrigerator
and freezer temperatures with an
integrated design that is easy-to-clean and
responds to touch for easy operation.
8.

Water Filter Indicator

(On Some Models)
The water filter indicator, located on the
control panel, will help you know when to
change the water filter.
A replacement water filter should be
ordered when "Order Filter" is displayed.
It is recommended that you replace the
filter when "Replace Filter" is displayed or
when water flow to your water dispenser
and/or ice maker decreases noticeably. See
"Changing the Water Filter" later in this
section.
After changing the water filter, press and
hold FILTER RESET for 3 seconds until the
"Order Filter" or "Replace Filter" indicator
light disappears.
7 | INTRODUCTION INTRODUCTION | 7