Télécharger Imprimer la page

AEG CS7900B Notice D'utilisation page 14

Publicité

Child Lock is activated. To enable the use of
the appliance, press the code letters in an
alphabetical order.
7.2 Automatic switch-off
For safety reasons, if the heating function is
active and no settings are changed, the
appliance will turn off automatically after a
certain period of time.
(°C)
30 - 115
120 - 195
8. CLOCK FUNCTIONS
8.1 Clock functions description
Function
Description
Timer
To set the cooking duration. Maximum
is 23 h 59 min. To set what happens
when the time is up select preferred:
End Action. Timer can be used inde‐
pendently, even when the oven is not
running.
End Action
Sound Alarm
When the time is up the signal sounds.
This function can be set at any time,
even when the appliance is turned off.
Sound Alarm and stop cooking
When the time is up the signal sounds
and the heating function turns off.
Pop up message only
When the time is up the message ap‐
pears on the display. This function has
no effect on the operation of the appli‐
ance.
Delayed
To postpone the start and / or end of
start
cooking.
Time Ex‐
To extend the cooking time.
tension
14
ENGLISH
If you intend to run a heating function for a
duration exceeding the automatic switch-off
time, set the cooking time. Refer to the 'Clock
functions' chapter.
7.3 Cooling fan
(h)
When the appliance operates, the cooling fan
turns on automatically to keep the surfaces of
12.5
the appliance cool. If you turn off the
8.5
appliance, the cooling fan can continue to
operate until the appliance cools down.
Function
Uptimer
8.2 Timer
1. Choose the heating function and set the
2. Press: Timer.
3. Set the duration. You can select the
4. Press
8.3 Delayed start
1. Choose the heating function and set the
2. Press
3. Press: Delayed start.
4. Scroll to set desired start time and press
5. You can now set desired End time or
(°C)
200 - 230
Description
To show how long the appliance oper‐
ates. Maximum is 23 h 59 min. It starts
automatically when an oven process is
started and stops when the process is
finished. It is visible on the main screen
in case where no other timer is set. This
function has no effect on the operation
of the appliance.
temperature.
preferred end action by pressing one of
the symbols.
to confirm and return to the
main screen.
temperature.
.
.
press
to skip this step.
(h)
5.5

Publicité

loading