Publicité
Roast
Get a crispy outside and tender inside for
meat, poultry, or vegetables.
Slow cook
Slow cooking increases the cooking time, but
you will get a better cooking result. Before
you put the meat in the oven, sear it.
Preserve
Optimized temperature for fast rising Put the
jars on a baking tray filled with water.
Plate warming
To preheat plates before serving
Keep Warm
Keep dishes warm to be served Please note
that some dishes may continue to cook and
dry out while being kept warm. Cover the
dishes if necessary.
Dehydrate
Evenly dry out fruits, herbs, and vegetables at
a low temperature. Open the door occasional‐
ly during drying to improve the drying result.
The lamp may turn off automatically at a
temperature below 80 °C during some
heating functions.
6.3 Dishes
Dishes submenu consists of a set of
programmes that are designed for dedicated
dishes. Each dish in this submenu is provided
with a suitable setting. The time and
temperature can be adjusted during cooking.
For some of the dishes you can also cook
with Food Sensor.
1. Enter menu and select: Dishes.
2. Choose a dish or a food type.
3. Adjust settings according to cooking
preferences. Adjust the weight. Option is
available for selected dishes. Press
4. Place the food inside the appliance
according to the instructions available on
the screen.
5. Press
.
When the function ends, check if the food is
ready. Extend the cooking time, if needed.
6.4 Favourites
This functionality is available for selected
models only.
You can save up to 20 of your favourite
settings, such as heating function, dish or
cleaning function.
To save the setting select the preferred
setting and press
Select: Favourites
1. Enter menu and press: Favourites to
check the saved settings.
2. Select one of the saved settings.
3. Press
Delete: Favourites
1. Enter menu and press: Favourites to
check the saved settings.
2. Press:
6.5 Maintenance
Submenu includes a list of cleaning
programmes.
Steam
Light cleaning.
Cleaning
Steam
Thorough cleaning.
Cleaning
Plus
Descaling
Cleaning of the steam generation cir‐
cuit from residual limestone.
Drying
Process for drying the cavity from the
condensation remaining after the use
of steam functions.
Rinsing
Process for rinsing and cleaning the
.
steam generation circuit after frequent
use of the steam functions.
6.6 Settings
This submenu includes a list of settings.
.
to start cooking.
to delete the saved settings.
ENGLISH
11
Publicité
