Publicité
2.4.
SOUND BAR / AUDIO RECEIVER VOLUME CONTROL
If you have your TV connected to a Sound Bar or Audio Receiver,
it's possible to set up your Qilive remote to control the Volume and
Mute of this device. There are two ways to do this:
AUDIO SIMPLESET
EN
If you have a Sound Bar or Audio Device from one of the brands
listed in the table below, you can use the SimpleSet method to
program your remote to control it. If you do not have one of the
below brands, please proceed to the next section.
Digit
Note that each of the brands has a digit associated with it, for
example 4 for LG (and JVC).
To set up your remote to control your Sound Bar / Audio Device,
first make sure your TV and Sound Bar / Audio Device are both
powered on, and that there is something playing that you can hear
(this procedure will test the Mute function). Next:
1.
2.
3.
As soon as your Sound Bar / Audio Device mutes the volume,
release the digit key. The LED will blink twice.
4.
Brand
Bose
Denon
Samsung / Harman/Kardon / JBL
LG / JVC
Marantz / Philips
Onkyo
Panasonic / Technics
Pioneer
Sony
Yamaha
Hold down the SETUP and VOLUME UP
buttons together until the LED will blinks twice.
Now point the remote towards your Sound Bar
/ Audio Devices and hold down the digit key for
your brand (for example 4 for LG). The remote
will send the Mute function to your device every
3 seconds.
Next, hold down the SETUP and VOLUME
DOWN keys until the LED blinks twice. The
volume up, down and Mute keys should now
control your Audio Device.
16
Publicité
