Publicité
6.
Repeat steps 3 and 4 for each key you want to learn –
remember you can learn from multiple remotes, but only
one function per key.
7.
* Some remotes send commands differently. If you find a function
cannot be learned, try holding down the key on the original
remote instead of pressing and releasing.
Hints:
• If the LED shows one long blink at step 5, the function was not
learned correctly, please try again from step 3.
• If you find one or more keys don't work properly after set up,
you can re-enter the learning mode at any time by repeating the
procedure from step 1.
• If one or more of your original remotes aren't working, you can
still set up the Qilive remote by SimpleSet or Code Set Up.
Deleting a learned function
If you want to delete a learned function and return that keys to its
original state, you can use the following procedure:
1.
2.
3.
Press the key you want to reset twice – the LED should
blink twice and the learned function has been deleted.
When you have learned all the functions you
require, press and hold Setup key until the LED
blinks twice.
Hold down the Setup key until the LED under
the Device key blinks twice.
Press 976 – the LED should blink twice
15
EN
Publicité
