Publicité
2.
SETUP
2.1.
SIMPLESET
If the brand of your device is shown in the SimpleSet picture
pointing to a key, you can use the SimpleSet system described in
this section, please locate the brand of your device and note the
key associated with it.
TV
Bush
Grundig
JVC
LG
Panasonic
Philips
Samsung
Sharp
Sony
Toshiba
To set up your device:
1.
Turn on your device (not on standby) and point the Qilive
remote towards it.
2.
3.
4.
The remote will send Power every 3 seconds until your
device switches off.
5.
As soon as your device switches off, release the digit.
6.
The LED will blink twice and the remote should now
operate your device.
• If you find one or more keys do not work as you expect, start
again at step 2 – the remote will start with the next code in the
memory.
Hold down the Setup key until the LED under
the Device key blinks twice.
Hold down the digit for your brand and device as
listed in the tables above - e.g. 7 for a Samsung
TV.
13
EN
Publicité
