Publicité
2.2.
SETUP BY CODE
If the brand of your device is not listed in the SimpleSet feature,
you can set up by trying codes individually. To do this firstly locate
your brand in the Code List. Codes are listed by brand and device,
and in order of popularity.
EN
1.
Turn on your device (not on standby) and point the Qilive
remote towards it.
2.
3.
4.
The LED will blink twice on the last digit of the code.
5.
6.
If the device turns off your remote is ready to use. If not,
repeat steps 2-5 with the next code in the list.
2.3.
LEARNING
Your Qilive remote control can learn any function from any other
working remote control. This is a quick and easy one-time setup
that allows to control any infrared controlled device you have in
your living room. It also allows you to add a key or keys that may
be missing to a spare key on the Qilive.
To do this, firstly make sure you have all your original remote
controls to hand, and that they have working batteries in.
To learn functions, the original remote should be approximately
3cm from the Qilive remote, pointing towards it:
1.
2.
3.
4.
5.
The LED will blink twice to indicate the key has been
learned correctly.
Hold down the Setup key until the LED under
the Device key blinks twice.
Enter the first 4 digit code listed for your brand
(e.g. 1840 for LG).
Now aim the remote towards your device and
press the Power key.
2 - 5 CM
Hold down the Setup key until the LED under
the Device key blinks twice.
Press 975 – the LED should blink twice.
Press and release the key you want to learn a
function onto (for example the TV Power key) –
the LED will begin to flash rapidly.
Press and release* the corresponding key on
the original remote, for example Power.
14
Publicité
