Stihl FS 360 C Notice D'emploi page 43

1
2
Start the engine.
N
Depress the throttle trigger (2) – do
N
not press down the throttle trigger
lockout (1).
If the engine speed increases or if the
cutting attachment rotates, the throttle
cable has to be adjusted.
Shut down the engine.
N
Adjust the throttle cable
Depress the throttle trigger lockout
N
(1) and the throttle trigger (2) as far
as stop and hold them in that
position.
Apply only sufficient pressure to hold the
levers against their stops.
Rotate screw in throttle trigger 1/2
N
turn counterclockwise.
Release the throttle trigger and
N
throttle trigger lockout.
FS 260 C, FS 360 C
All manuals and user guides at all-guides.com
Start the engine and check the
N
adjustment.
Shut down the engine and repeat
N
adjustment if necessary.
Inspections and Maintenance
by Dealer
Maintenance Work
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Fuel Pickup Body in Tank
Check the pickup body in the fuel
N
tank every year and have it replaced
if necessary.
The pickup body should be positioned in
the area of the tank shown in the
illustration.
English
41