Publicité
Lubrication
NOTE
►
Regular lubrication is particularly important to avoid friction
and corrosion damage . We recommend using a suitable
special oil for compressed air tools (e .g . Liqui Moly compressor
oil) .
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally
lubricates the appliance as a preparation stage after the
pressure reducer . A mist oiler gives off fine drops of oil into
the air flow and thus guarantees regular lubrication .
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions . Add 3–5 drops of
pneumatic oil into the connector nipple
Refilling oil
To ensure that the tool remains operational for a long time, the tool
must have a sufficient fill of pneumatic oil .
You have the following options:
♦
Attach a maintenance unit with an oiler to the compressor .
♦
Install an add-on oiler in the compressed air line or the com-
pressed air tool .
♦
Add 3–5 drops of pneumatic oil into the connector nipple
every 15 minutes of operation .
■
56
│
GB │ IE
.
PDRS 6.3 B2
Publicité
