Before Operation; Setting The Clock - Sharp R-249 Mode D'emploi

Plug in the oven.
1. The oven display will flash:
2. Touch the STOP key the display will show:
x1
To set the clock, see below.
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the POWER/WEIGHT key down for 3 seconds.
will appear in the display.
2. To set the 24 hour clock, press the POWER/WEIGHT key once more after
Step 1, in the example below
To set the clock, follow the example below.
Example:
To set the 24 hour clock to 23:35.
1. Choose the clock function.
(12 hour clock)
x1and hold
for 3 secs.
4. Set the minutes.
Press the TIME keys until the
correct minute is displayed (35).
x3
NOTE:
1. Press the STOP key if you make a mistake during
programming.
2. If you press any of the TIME keys too many times,
continue to press the key until the desired time
re-appears.
3. If the clock is set, when cooking is complete, the
display will show the correct time of day.
If the clock has not been set, the display will only
will appear in the display.
Choose the 24 hour
clock.
x1
5. Press the POWER/WEIGHT key
to start the clock.
x5
142/GB-4

BEFORE OPERATION

Using the STOP key
Use the STOP key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.

SETTING THE CLOCK

2. Set the hours.
Press the TIME keys until the
correct hour is displayed (23).
x2
Check the display.
x1
show when cooking is complete.
4. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show
occurs during cooking, the programme will be
erased. The time of day will also be erased.
5. When you want to reset the time of day, follow the
above example again.
x1 and hold
for 3 secs.
3. Press the
POWER/WEIGHT key
to change from hours to
minutes.
x3
after the power is reinstated. If this
x1