Riello RX 360 S/PV Instructions Pour Installation, Utilisation Et Entretien page 13

4.7 Burner description
20069594
1 Combustion head
2 Ignition electrode
3 Flame sensor probe
4 Gas valve
5 Air/gas mixer in the suction line circuit
6 Gas pressure test point
7 Gas valve conduit - Venturi
8 Gas input
9 Boiler fixing flange
10 Fan
11 Air passage in fan
12 Control box with lockout pilot light
13 Reset button
14 Plug-socket on ionisation probe cable
15 Sockets for electrical connection
16 Transformer
17 Plate with four hole knock-outs for electrical cable routing
Burner lockout may occur.
 control box lockout:
if the control box 13)(Fig. 4) push-button lights up, it indicates
that the burner is in lockout.to reset, press the push-button.
Technical description of the burner
11 GB
Fig. 4
20068189