Télécharger Imprimer la page

Mesto 3561 Mode D'emploi page 19

Publicité

EN
The shut-off valve does
not close.
Liquid emerges without the
lever being activated.
Pressure gage is not indi-
cating any tank pressure.
Contact address for additional information → see title page.
Warranty
We guarantee that from the time it is first purchased for a period of the legally valid requi-
red warranty period (maximum 3 years) this device will not exhibit any material or proces-
sing errors. If defects are discovered during the warranty period, the manufacturer or the
distributor in your country will repair the device without charging for the labor or material or
(at the discretion of the manufacturer) replace the device itself or its defective parts. If such
defects are discovered, please contact us immediately. We require the invoice or cash
register receipt for purchase of the device. The warranty does not include wearing parts
(seals, O-rings, diaphragm, etc.) or defects, which have occurred due to improper use or
unforeseeable circumstances.
Declaration of Conformity
We, MESTO Spritzenfabrik Ernst Stockburger GmbH, Ludwigsburger Straße 71,
D-71691 Freiberg,
declare under our sole responsibility that the products pressure spraying devices 3561..
and 3581.. in the version supplied comply with all relevant provisions of the Directive
2014/68/EU.
Rolf Rehkugler is authorized to compile the technical documentation.
Freiberg,
20.12.2018
The data and illustrations in these instructions for use are for orientation only and not
binding in any way. The manufacturer reserves the right to make changes or improvements
to the products if these are considered appropriate without having to notify customers
owning a similar model about this fact.
1123
O-ring [24] on the pressure
bolt not greased.
Defective pressure bolt [25]
or O-ring [24].
Pressure gage [16] defec-
tive.
Bernd Stockburger – Managing Director –
Original operating instructions
19
ENGLISH
Grease the O-ring of the pres-
sure bolt (Fig. 29).
Replace the pressure bolt or
O-ring (Fig. 29).
Unscrew pressure gage with
wrench and replace (Fig. 30).
6093001

Publicité

loading

Ce manuel est également adapté pour:

3581