Télécharger Imprimer la page

Husqvarna Soff-Cut 4000 Manuel D'utilisation page 4

Masquer les pouces Voir aussi pour Soff-Cut 4000:

Publicité

35. Skid plate (not included)
36. Adapter for dust extractor connection
37. Operator's manual
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Read and understand the operator's
manual for the dust extractor.
Use hearing protection.
Use approved eye protection.
The dust can cause health problems. Use
an approved respiratory protection.
Use a protective helmet in locations where
objects can fall on you.
To lift the product, attach lifting equipment
to the lift point on the product.
4
Risk of injury and damage
to the product. Be careful
when you lift the product.
Remove the cutting blade
before you lift the product.
Belt entanglement hazard.
Keep hands and other
bodyparts clear from mov-
ing parts.
Machinery hazard. Risk of
cut injuries. Keep hands
and feet clear.
The arrow on the blade block show the
direction in which the blade rotate.
Do not use a combustion engine product
indoors or in areas that do not have
sufficient airflow. Do not breathe exhaust
fumes. The dust can cause health
problems. Use an approved respiratory
protection.
Keep all the guards in place.
Do not use in flammable areas.
Fill engine oil to correct level.
Cutting depth switch, lower the cutting
blade.
Cutting depth switch, lift the cutting blade.
OFF, stops the engine.
RUN, starts the ignition.
START, cranks the engine.
Note
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Note
CALIFORNIA AIR RESOURCES BOARD
(CARB): This machine is considered a preempt Off-
Road Application as relating to CARB standards. The
U.S EPA has sole authority to establish emission
standards for preempt construction equipment.
794 - 001 - 19.04.2022

Publicité

loading