Publicité
3. Turn the 2 locking knobs counterclockwise and
remove the blade block guard.
4. Push down on the kerf guide to release the skid
plate.
5. Put the supplied blade wrench on the blade shaft
bolt in the blade block.
6. Use the blade wrench to turn the blade shaft
counterclockwise while you push the locking pin. The
locking pin will drop down and lock the blade shaft.
24
7. Use a wrench to remove the blade shaft bolt (A).
Remove the outer blade flange (B). Remove the
blade (C) from the blade shaft (D).
C
D
B
A
8. Remove the 2 screws and the 2 washers. Pull the
floating side cover down and out to remove.
794 - 001 - 19.04.2022
Publicité
