Publicité
STOVE DESCRIPTION
• The stove was manufactured and tested according to the European standard EN 13240,
• Figure 1 shows the stove with components essential for use.
• The stove is intended for indoor heating.
• The hob, the flue, firebox doors and ashtrays are made of grey cast iron, coated with heat-
resistant paint.
• There is a glass on the firebox door (heat-resistant glass).
• The sealing between the hob and the stove body, as well as on all doors, is made of glass braid.
• There is a primary air regulator on the ashtray door (position 3).
• The outer parts of the stove are made of steel sheet which is protected by enamel.
• With the HIT and CORNER stoves, the flue is delivered independently of the hob and is
connected to it with screws, while the flue on the HAPPY stove is cast together with the hob
(inseparable assembly).
Stove components (figure 1)
1 - firebox door
2 - ashtray door
3 - primary air regulator
4 - hob
5 - flue
6 - handle
7 - glass
8 - side
4
5
1
7
6
2
6
3
4
1
7
6
2
6
3
4
1
7
8
6
2
6
3
CORNER
5
HIT
5
HAPPY
8
8
17
Publicité
