Publicité
en operation
Screw the To-Go blade insert and
4.
the To-Go blender jug in tightly.
→ Fig.
21
– The
and
match up.
– You can only connect the To-Go
blade insert to the main unit
when the To-Go blender jug is
screwed on fully.
Set the rotary switch to .
5.
Turn the To-Go blender jug upside
6.
down.
→ Fig.
22
Place the To-Go blade insert on
7.
the main unit and rotate it in a
clockwise direction until it locks
into place.
→ Fig.
22
Set the rotary switch to the recom-
8.
mended speed.
→ Fig.
23
Tip: We recommend pausing oper-
ation several times when preparing
smaller quantities of baby food in
the To-Go blender jug.
Processing can also take place
with instantaneous switching.
→ "Using instantaneous switching",
Page 40
Process the ingredients until you
9.
achieve the required result.
To end the operation, set the rotary
10.
switch to .
→ Fig.
24
7.10 Closing the To-Go
blender jug
Requirement: The appliance has
stopped.
Turn the To-Go blender jug anti-
1.
clockwise and remove it from the
main unit.
→ Fig.
25
42
markings must
Turn the To-Go blender jug and un-
2.
screw the To-Go blade insert.
→ Fig.
25
Insert the seal for the lid.
3.
→ Fig.
26
Close the mouthpiece on the lid.
4.
→ Fig.
26
Screw the lid and the To-Go
5.
blender jug in tightly.
→ Fig.
26
7.11 Using the chopper-
grinder accessory to
process food
Prepare the food.
1.
For example, cut large items of
food into pieces.
Add the ingredients to the chop-
2.
per-grinder attachment.
→ Fig.
27
Observe the maximum processing
quantities.
→ "Overview of recipes", Page 45
Place the chopper-grinder blade in-
3.
sert on the chopper-grinder attach-
ment.
→ Fig.
28
Screw the chopper-grinder blade
4.
insert and the chopper-grinder at-
tachment in tightly.
→ Fig.
29
– The
and
match up.
– You can only connect the chop-
per-grinder blade insert to the
main unit when the chopper-
grinder attachment is fully
screwed on.
Set the rotary switch to .
5.
Turn the chopper-grinder access-
6.
ory upside down.
→ Fig.
30
markings must
Publicité
