Publicité
en Cleaning and servicing
8.4 Cleaning the blender
WARNING
Risk of cutting!
The blender knife has sharp blades.
▶
When cleaning and emptying the
blender jug, watch out for the
sharp blades.
▶
Never touch the edges of the
blades with bare hands.
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
▶
Never set the blade insert down
with the blade facing downwards.
Remove the measuring jug.
1.
→ Fig.
35
Remove the lid.
2.
→ Fig.
35
Turn the blender jug anti-clockwise
3.
and remove it from the main unit.
→ Fig.
36
Turn the blender jug upside down.
4.
Open the retaining bracket.
5.
→ Fig.
37
Remove the EasyClick blade insert
6.
from the blender jug.
→ Fig.
37
Clean the components.
7.
8.5 Cleaning the To-Go
blender jug and To-Go
blade insert
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
▶
Never set the blade insert down
with the blade facing downwards.
44
Turn the To-Go blade insert anti-
1.
clockwise and remove it from the
To-Go blender jug.
→ Fig.
38
Turn the lid anti-clockwise and re-
2.
move it from the To-Go blender
jug.
→ Fig.
39
Open the mouthpiece on the lid.
3.
→ Fig.
39
Remove the seal.
4.
→ Fig.
39
Clean the components.
5.
8.6 Cleaning the chopper-
grinder accessory
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
▶
Never set the blade insert down
with the blade facing downwards.
Rotate the chopper-grinder blade
1.
insert anticlockwise and remove it
from the chopper-grinder attach-
ment.
→ Fig.
40
Clean the components.
2.
8.7 Using the cleaning pro-
gramme
You can use the cleaning pro-
gramme to preclean the blender jug
and the blade insert.
Requirements
¡ The blade insert is installed.
¡ The blender jug has been attached
and locked.
¡ The blender jug is filled with clean-
ing fluid (700 g water + 1 drops of
washing-up liquid).
¡ The lid is attached and locked.
¡ The rotary switch is set to .
Publicité
