Télécharger Imprimer la page

Parkside 459262 2401 Instructions De Montage Et Mode D'emploi page 7

Publicité

CAUTION Do not leave children unattended near the prod-
uct. This product is not a climbing device or toy. Make sure that
people, especially children, do not climb on the product or do
not lean on the product. The product could overbalance and tip
over. It can result in injuries and/or damage.
Inspect the hand truck for damage before use.
The hand truck is intended exclusively for transporting goods.
Persons may not be transported!
The load must be secured when using stairs!
The permissible height of steps is between 160 and 220 mm.
The hand truck is not suitable for steps with an overhang.
Use the step hand truck only on closed stairways.
Assembly
1. Fold out the loading shovel
2. Fasten the wheels
provided
3
3. Press the two red knobs
the tubes
Operational start
1. To ensure safe use, check the connection of all parts.
2. Fold the loading shovel
adjustment of the handle bow
3. The load-bearing capacity is maximum of 150 kg when the
weight is evenly distributed. The maximum payload reduces to
40 kg when using steps. Please note that the relevant maximum
payload may not be exceeded.
at the axle
2
.
.
7
in a 90° angle downwards.
1
with the safety mechanism
4
. Finally, insert the handle bow
5
downwards. You can vary the height
1
by pressing the knobs
6
into
6
.
5
7

Publicité

loading