Technical Characteristics - SPIDO SPR1100 Manuel D'instructions

EN
You might need to...
Repair connections and/or change the suction hose.
Place the pump in accordance with its performances (recommended heights
of suction and discharge).
Clean up the filter of the pump.
Fill the pump with water.
Abnormal noise?
Have you checked...
If the pump is correctly fixed on its support?
If the pump did not suck up dirt?
If system hoses diameter are sufficient
(at least the diameter of the pump connectors)?
You might need to...
Tight pump fixations
Clean up the pump filter
Change the diameter of the hoses
SYMBOLS
The pump must not be disposed of with normal household waste
but must be disposed of in accordance with local environmental
regulations.
Conformity with safety rules applicable in the UE market.

TECHNICAL CHARACTERISTICS

Type: SPIDO SPR1100
Voltage/Frequency: 220-240V AC/50Hz
Nominal Power:1100W (1,5 CV)
Delivery max: 22 000 l/h
Delivery head (pressure): 16 m
Protection class: IP X5
Weight: 12,3 Kg