SPIDO SPR1100 Manuel D'instructions page 10

EN
TO BE CHECKED BEFORE YOU START
The pump is made for swimming pool equipment.
The pump has to be fixed on a plane and solid surface
The pump is made for clear water circulation, with a temperature below
35°C
This pump is only made for swimming pools and basins that comply with
IEC 60364-7-702 regulation, and the national regulations where the pump
is installed
POMPE SPR 1100
10
4
1. Drainage cap
2. Pump housing
3. Clamping screw
4. Water input. Suction connector : Ø 50 mm
5. Water output. Delivery connector : Ø 50 mm
5
9
3
2
8
1
6
7
6. Electric box
7. Motor
8. Foot / Base
9. Filter
10. Cap of the filter