Publicité
FR
ES
12. TROUBLESHOOTING
PT
Problems
IT
EL
Device doesn't start
PL
Vibrations are too
UA
strong
RO
Blade does rotate
smoothly, abnormal
noises can be heard
EN
13. RECYCLING
IMPORTANT! PLEASE READ THIS MANUAL BEFORE USING THIS PRODUCT, FOLLOW THE BASIC SAFETY
WARNINGS WITHIN, AND KEEP IT CAREFULLY.
222
222
Probable causes
No electricity arrives at the machine
The motor is overloaded or Over heated
On/off switch may be defective
Engine faulty
Screws or parts are loose
The miter saw is not correctly mounted Remove blockages
Work piece is not properly supported
Blade nut is loosen
Blade is defective
The packaging consists of environmentally friendly material. It can be disposed of in
the local recycling containers.
CAUTION! This product has been marked with a symbol relating to removing electric
and electronic waste. This means that this product shall not be discarded with
household waste but that it shall be returned to a collection system which conforms
to the European WEEE Directive. Contact your local authorities or stocks for advice on
recycling. It will then be recycled or dismantled in order to reduce the impact on the
environment. Electric and electronic equipment can be hazardous for the environ-
ment and for human health since they contain hazardous substances.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authorities or retailer for recycling
advice. It will then be recycled or dismantled in order to reduce the impact on the
environment.
Corrective action
Check the power supply and the power line.
Allow the machine to run idle for about 2 mins
to cool down
Repair by customer care
Repair by customer care
Secure the work piece
Tighten blade nut
Change blade
Publicité
